OUTPUT SIZE: Depends on the material
90-650T/H
PROCESSED MATERIALS:All kinds of ores such as limestone granite gypsum pebble copper ore gold ore etc

OUTPUT SIZE: Depends on the material
15-500T/H
PROCESSED MATERIALS:Limestone granite basalt andesite quartz silica gypsum volcanic rocks marble pebble sand coal etc.

OUTPUT SIZE: Depends on the material
45-430T/H
PROCESSED MATERIALS:Limestone granite basalt andesite quartz silica gypsum volcanic rocks marble pebble sand coal etc.

OUTPUT SIZE: Depends on the material
45-430T/H
PROCESSED MATERIALS:Limestone granite basalt andesite quartz silica gypsum volcanic rocks marble pebble sand coal etc.

OUTPUT SIZE: Depends on the material
100-520T/H
PROCESSED MATERIALS:Iron ore copper ore gold and silver ore zinc ore manganese ore limestone granite basalt cobble coal gangue quartz etc.

OUTPUT SIZE: Depends on the material
70-450T/H
<p>PROCESSED MATERIALS:Limestone granite basalt andesite quartz silica gypsum volcanic rocks marble pebble sand coal etc.</p>

Output size:Depend on materials
110-600T/H
<p>Suitable for coarse crushing,medium fine crushing,screening,shaping sand making</p>

OUTPUT SIZE: Depends on the material
10-810T/H
<p>PROCESSED MATERIALS:Besides sticky all kinds of ores</p>

OUTPUT SIZE: Depends on the material
180T/H

OUTPUT SIZE: Depends on the material
10-810T/H

depending on the equipment
100-300T/H
<p>River pebbles, granite, basalt, iron ore, limestone, quartzite, diabase, iron ore, gold ore, copper ore, construction waste, etc.</p>

OUTPUT SIZE : 140-250mm
 2015-8895TPH
<p> PROCESSED MATERIALS : Iron ore manganese ore gold ore copper ore granite basalt diaba<x>se limestone dolomite etc</x></p>

OUTPUT SIZE: Depends on the material
90-400TPH
<p> PROCESSED MATERIALS:<br> Stone with compression strength lower than 350Mpa such as limestone gypsum concrete etc.</p>

560t/h
<p>PROCESSED MATERIALS : limestone granite basalt andesite quartz silica gypsum volcanic rock dolomite ballast pozzolana marble river stone gravel pebble Iron ore copper ore gold ore manganese ore etc.</p>

250-2000t/h
PROCESSED MATERIALS:The CI5X Series Impact Crushers is most suitable for crushing the materials whose crushing strength lower than 320MP, like mineral, rock and slag, etc. 2. Apply to material water content lower than 20%.

160-1500t/h
PROCESSED MATERIALS: The C6X Series Jaw Crushers is most suitable for crushing the materials whose crushing strength lower than 320MP like mineral rock and slag etc.

OUTPUT SIZE: Various size
Up to 800TPH
PROCESSED MATERIALS: 1.Apply to fragility stone hardness below Moh&#39;s 9 degree，unwelcome to sticky material and muddy much material； 2. Apply to material water content lower than 20%； 3. Apply to special flammable material as coal、calcium carbide and so on.

OUTPUT SIZE: Various size
10-200TPH
PROCESSED MATERIALS: quartz sand emery refractory material cement copper ore gold ore furnace slag river stones concrete aggregate asphalt aggregate

OUTPUT SIZE: Various size
Up to 520TPH
PROCESSED MATERIALS: Pebble River stone Mountain stone(limestone granite basalt diaba<x>se andesite) mine tailings stone chips non-me<x>tal ores cement bauxita silicon carbide etc.</x></x>

OUTPUT SIZE: Various size
Up to 640TPH
PROCESSED MATERIALS: quartz minerals granite limestone bauxite basalt mines cement plants fire proof materials aluminum soil abrasives glass raw material building materials sand and me<x>tallurgical slag.</x>

OUTPUT SIZE: 6-30mm
55-700TPH
Processed Materials: Iron ore copper ore gold ore manganese ore river stone gravelgranitebasaltmine orequartzdiaba<x>seetc. (for hard stone).</x>

OUTPUT SIZE: 4-38mm
27-660TPH
PROCESSED MATERIALS: It is suitable for the crushing various minerals and rocks whose Platt&#39;s hardness are less than 16 such as iron ore copper ore gold ore manganese ore nonferrous me<x>tal ore granite limestone quartzite sandstone pebbles etc.</x>

OUTPUT SIZE: 3mm-60mm
15-1000TPH
PROCESSED MATERIALS: Hard and medium hard material such as iron ore copper ore gold ore manganese ore quartz granite basalt and so on.

OUTPUT SIZE: 9mm-64mm
Up to 1270TPH(standard); Up to 599TPH (short head)
PROCESSED MATERIALS: Iron ore copper ore gold ore manganese ore and other mineral stone

70-300TPH
PROCESSED MATERIALS: Pebble granite basalt iron ore limestone quartz diaba<x>se etc</x>

OUTPUT SIZE: Depends on the material
50-350TPH
PROCESSED MATERIALS: Limestone rock granite cli<x>nker slag bank gravel coa.etc</x>

OUTPUT SIZE: 10mm to 275mm
Up to 650TPH
PROCESSED MATERIALS:Iron ore copper ore gold ore manganese ore especially for hard and abrasion stone and rock.

OUTPUT SIZE: 40-350mm
Up to 800TPH
PROCESSED MATERIALS: Iron ore copper ore gold ore manganese ore all kinds of mineral stone except viscous materail.

Depends on the material


CHECK PRODUCT SPARE-PARTS